BioCode-1000 Analyzer:
1 Sample,
1 Well,
32 or 128 Targets
BioCode-1000 Analyzer is a simple and robust BMB
optical imaging system for a 96-well microplate format. After undergoing reaction,
the beads settle to the bottom of each well,
allowing for barcode identification and
fluorescent signal detection. Multiple analyte
tests can be performed in each well. One well
holds one sample; therefore, each 96-well plate
can simultaneously hold 96 patient samples.
The system can perform 32- or 128-target test for 96
samples in one hour.
BioCode-1000 Analyzer utilizes an XY
translational stage, which rapidly scans the
entire microplate, as well as a CCD camera that
detects both bright field barcode signal and
reaction fluorescence signal. Biochemical reactions are
quantitatively reported
based on fluorescence intensity. Cy3 and phycoerythrin (PE) are common fluorophores used
for analyte detection; other fluorophores can
also be accommodated by switching optical filter
sets. Through a digital barcode, each BMB
microbead is encoded with the information of the
biological probe immobilized on its surface.
BioCode-1000 Analyzer rapidly displays the
barcode and fluorescence intensity for each BMB,
facilitating clear reporting of reaction results
for each probe.
BioCode-1000 Analyzer
Specifications
|
Multiplex Assays/Test |
1~32 analytes, 1~128 analytes |
|
Plate Format |
96-well microplate |
|
Bright Field Light Source |
LED |
Fluorescence
Light Source |
120W metal halide lamp
(excitation: 530nm, fluorescence:
575nm); wavelength adjustable depending
on filter sets for PE, Cy3, Cy5, QD, NIR
dye, etc. |
|
Detector |
CCD, 12 bit; with IEEE 1394 host
computer interface |
|
Sensitivity |
0.5 f mole
GAPDH (DNA) or
1.0 pg/ml
IL-2 (protein) with PE label
|
|
Dynamic Range |
4 logs |
|
Speed |
Detection to result:
40 seconds per well |
|
CV |
Between runs: typical 2~3%, <5%;
System to system: <10% |
|
IT Connectivity |
Standard with serial RS232 |
|
Power Requirements |
100 – 240VAC~, 50/60 Hz, 0.8A |
|
Dimension |
26”W x 15 3/4”D x 17”H |
|
CE Certified |
Conforming to Laboratory Equipment
Standards:
-
EN55011
-
EN61010-1
-
EN61326-1
-
IEC61010
-
EN61000-3-2
-
EN61000-3-3
|
Becoming Our Strategic
Partners
Expand your market share by becoming Applied BioCode's partner which provides you the access
to the
newest multiplex platform - Barcoded Magnetic
Bead technology. Please call us today
1-562-801-0050.
* BioCode-1000 Analyzer is intended For Research
Use only. Not for use in Diagnostic Procedures. |
